Technicians in protective clothing reviewing production data on a tablet next to a machine
In development

LeanPad AI

The analysis, done for you

You capture the work as you do today. AI turns it into suggestions — where to tap, which tasks to move, what to convert, how risky a posture is — writes the report, and answers your questions about it. You stay in charge of every decision.

How it works

AI suggests. You decide.

Capture on the tablet as today. Send only the study or clip you want analysed. Every suggestion waits for your approval.

  1. Worker

    • Time studies
    • Changeovers
    • Posture on video
  2. Data

    • Cycle and task times
    • Waste and waits
    • Plant context
  3. LeanPad AI

    • Finds patterns
    • Spots the bottleneck
    • Drafts the fixes
  4. Action

    • You approve
    • The line is rebalanced
    • Results are tracked

Line balancing AI

The bottleneck, found before you look for it

LeanPad AI compares every station with takt, points to the one holding the line back, and proposes which tasks to move.

Operators working at stations along an assembly line

LEANPAD AI

Analysing line balance…

Takt28:20

28:08

Station 1

34:22

Station 2

23:50

Station 3

Bottleneck: Station 2, +6:02 over takt

Illustration with demo data · LeanPad AI is in development

AI assistant

Ask your report anything

Each report has an assistant that answers from your own study: why a cycle ran long, what drove the changeover, which task is riskiest — with the actions to take.

Assembly line A · Station 2

Time study — Operator B

VA ratio

67%

Waste

21:20

Cycle times

  • Cycle 138:14
  • Cycle 232:04
  • Cycle 332:46

Waste — by total time

  • Waiting for material8:15
  • Walking to fetch tools5:05
  • Rework – part misaligned4:20
  • Searching for tools2:25

AI assistant

Why was cycle 1 so much longer?

Cycle 1 took 38:14, about 6 minutes more than cycles 2 and 3. Most of the gap is a rework on a misaligned part at Fit motor unit (4:20), which only happened in cycle 1, plus a longer wait for material (3:10 instead of 2:20–2:45).

Suggested actions

  1. Check part alignment at the previous station
  2. Stage material at the line before Mount frame
  3. Keep the tools at the station
Ask about this study…

Illustration with demo data · LeanPad AI is in development

See it

Posture risk, straight from ordinary video

Film a task with any tablet or phone. The ergonomics AI tracks the body in every frame, measures the joint angles and colours each segment by risk — the numbers behind a REBA, RULA or NIOSH assessment, without a stopwatch or a protractor.

  • Works from the camera you already have
  • Scores every frame, so the worst moment is never missed
  • A written assessment drafted from the scores, ready for the file

Footage: Pexels (free licence). Preview of the module in development.

See it on your own process

In 30 minutes we show you the tools on a line like yours, answer your questions and tell you honestly whether they fit.

AI by module

Every tool gets smarter

Each module has its own optional AI add-on, built around the work that takes engineers the longest.

Time Study

Module · available now

  • Suggested tap points from an attached video, for you to confirm or adjust
  • A written summary of every session: where the time went and what to fix first
  • Chat with your results: ask why a cycle ran long or where the waste is, and get answers from your own data
About Time Study →

Work Sampling

Module · on the roadmap

  • Snap a photo of the area and AI tags what each person is doing, instead of a manual tally
  • Ask questions about the results in plain language, answered from your own observations
About Work Sampling →

Line Balancing (Yamazumi)

Module · available now

  • Suggested task moves between stations to flatten the chart against takt
  • Ask “what if” in plain language — add an operator, change takt — and get the recalculated line
About Line Balancing →

SMED Changeover

Module · available now

  • Suggested internal-to-external conversions, with the reasoning for each
  • A written changeover procedure drafted from a recording, ready to post at the machine
  • Chat with the changeover report: ask what drove the internal time or what changed since last time
About SMED Changeover →

Ergonomic Assessments (REBA, RULA, NIOSH)

Module · coming next

  • Pose tracking on ordinary video: a skeleton drawn over the worker, with joint angles scored automatically
  • A written ergonomic assessment from the scores, ready to hand to the client or the file
  • Ask questions about any assessment — which task is riskiest and why — answered from the scores
About Ergonomic Assessments →

Action Tracker & Savings

Module · on the roadmap

  • Action cards drafted automatically from any Pareto chart, one click to accept and assign
  • A written savings summary once the before/after results are in
  • Ask how much a line has saved, or which actions are overdue, in plain language
About Action Tracker & Savings →

Hourly Production Board

Module · on the roadmap

  • Shortfall reasons typed in plain words, sorted into consistent categories for reporting
  • An early warning when an hour is heading for a miss, while there is still time to act
About Hourly Production Board →

How it is sold

An add-on, never a requirement

Optional, per module

Add AI only to the modules that need it. The core tools work fully without it, including on one-time licences.

Fair-use limit included

Each AI add-on is a subscription with a generous monthly allowance, so the cost is known in advance.

Unlimited when you need it

Heavy users can move to an unlimited plan, per device or per site, whenever they choose.

Your data

Built for plants that take data seriously

Offline core, unchanged

Capturing, charts and exports still run on the device. AI is the only part that needs a connection.

You choose what is sent

Only the study, clip or photo you ask about is analysed — nothing is uploaded in the background.

Through our servers only

Devices never talk to an AI provider directly. Requests go through LeanPad’s servers, which check, meter and log them.

Not used for training

We only use AI services that do not train their models on your data.

Limits that protect you

Monthly allowances and rate limits mean a runaway device can never run up a surprise bill.

Switch it off anytime

Disable AI for a device, a site or the whole company, and keep every recording.

FAQ

Questions about LeanPad AI

Is it available today?

The AI add-ons are in development and roll out module by module, starting with the tools that are already available. Contact us to join the early-access programme.

Does AI replace the industrial engineer?

No. It removes the slow, repetitive part — tagging video, tallying samples, writing up reports — and makes suggestions. Every suggestion is shown to you to accept, change or reject.

Do we need AI to use LeanPad?

No. Every module works fully without it, offline, with one-time or subscription licences. AI is an optional subscription on top.

What happens to our videos and data?

Only what you choose to analyse is sent, through LeanPad’s servers, to the AI service that processes it, and it is not used to train AI models. Your recordings themselves stay on your device.

Can the AI be adapted to our process?

Yes. Categories, report wording and suggestions can be tuned to your plant — see custom solutions for what we adapt and build.

Want AI on your line first?

Tell us which study takes your team the longest. Early-access sites help shape how each AI feature works.